Specifications Model: Cinelog35 V2 HD O3 Frame: GEP-CL35 V2 Wheelbase: 142mm Gimbal plate: 2.0mm Top plate: 3.5mm Bottom plate: 1.5mm FC system: GEP-F722-45A AIO V2 MCU: STM32F722RET6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E chip ESC: 8Bit 45A VTX: O3 Air Unit Camera: O3 Antenna: 5.8G&2.4G Motor: SPEEDX2 2105.5-2650KV (6S) Propeller: HQProp D-T90MM GPS: GEP-M8U CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX Recommended battery: LiPo 1050mah-1300mah Flight time: 5′00″ -8′ 30″ Includes 1 x Cinelog35 V2 HD O3 2 x HQProp D-T90MM（2 pairs） 2x M20*250mm battery strap 2 x Battery Silicone Pads 1 x Set of screws 1 x L-shaped screwdriver (1.5mm) 1 x L-shaped screwdriver (2mm) 1 x L-shaped screwdriver (3mm) 1 x M5 wrench 1 x plastic tweezers 1 x Antenna fixed tube (pair) 1 x Keychain 1 x GP Camera Mounting Base 1 x Naked GP Camera Mounting Base 1 x Antenna Mounting Base