RADIX FC Features

• Best setup manual ever made - step by step guys! Human error prevented. BOOOM
  • Betaflight quick start guide:  https://www.brainfpv.com/knowledgebase/betaflight-quick-start-guide/
  • BrainFPV gOSD guide: https://www.brainfpv.com/knowledgebase/how-to-pimp-your-osd-with-the-brainfpv-gosd/
• SEXY form factor for easier soldering of PDB / 4-in-1 ESC underneath RADIX FC
• Plug-and-play stacking on RADIX PB or any 4-in-1  as well as the TBS Crossfire Nano RX
•  Connects to the PB and 4in1 ESC using soft cables for vibration isolation
• Graphical OSD - STILL the only flight controller running BF/iNAV with this feature
• Customizable OSD logos using the BrainFPV Logo Customizer
• STM32 F4 processor running at 180MHz
• Better sensors - Bosch BMI160 gyro, proven on RE1 (pilots are raving about it)
• Integrated barometer - so you always know how high you are 
• MicroSD card slot for logging
• Integrated silicone grommets for vibration isolation
• Dedicated camera control pad for changing camera settings
• Dedicated RGB LED output for programmable LEDs
• Four full hardware serial ports (UARTs) - two of them have signal inverters that are automatically enabled or disabled, so they can be used with S.Bus or SmartPort
• 6 motor outputs with support for DHSOT (150/300/600/1200) and OneShot
• Supports Betaflight
• Engineered and tested and flashed and bagged and labelled by Jenni + Martin in Portland, Oregon USA